CSRSprod.washwiz.html

The WashWater Wizard monitors the amount of film usage to determine the correct amount of wash water. Competitive wash water systems use a time-interval (hold and dump) concept of operation. Any fluctuations in processing volume require manual adjustment and can create potential film processing problems: Either the water will be dumped too often, or it will be reused far too long, allowing the accumulation of contaminants. This accumulation will ultimately affect film quality, archievability and the environment.

The WashWater Wizard^TM is a closed loop system that operates in-line without requiring a holding tank. This means less floor space is occupied.

Competitive systems depend on gravity to take the overflow from the processor to the wash water unit. They require an extra holding tank which adds to the cost and uses valuable floor space. Their operation interrupts production, is time consuming, and there is a potential risk of flooding the processor.

The WashWater Wizard^TM system includes an automatically regulated biocide feeder. The Wizard continually monitors water usage and automatically doses the correct amount of biocide (even while in stand by mode) to substantially reduce biogrowth in the processor.

Download The Wash Water Wizard Product Specification Sheet
		*The CSRS Wash Water Wizard*
	The Wash Water Wizard can reduce water usage by 95% and still maintain film archivability in excess of 500 years! Download The Results of the Film Archivability Test for The Wash Water Wizard
	FEATURES: BUILT TO LAST with CSRS' microprocessor driven technology Contemporary design of durable, polyethylene Most compact system on the market today; less than 9 inches deep! Closed-Loop system not dependent on gravity Closed-Loop system automatically recirculates wash water *Preprogrammed to automatically dose biocide to reduce biogrowth Audible alarm to indicate clogged filter Innovative operation requires no bulky holding tank to clean, flood, or take up valuable space Monitors film usage to determine correct amount of water required for quality film archivability Filters contaminates and eliminates silver to <1ppm Self-regulating. Software automatically switches from active to stand by mode with processor usage Automatically doses and recirculates biocide when processor is dormant for extended periods Dramatically reduces the amount of water consumption, 90-95% Audible signal tells user when to replace filters Window shows fluid level of biocide Versatile placement; on floor with stand, or wall mount Can be mounted piggy-back w/CSRS J-Series Silver Wizard^TM Models J1t or J2t recirculating silver recovery units. Plug and play For Discharge limits below 1.0 ppm and maximum operating efficiency, a CSRS Silver Wizard™ Recirculating Silver Recovery Unit is recommended to be used in conjunction with the Washwater Wizard™.**			HOW IS IT DIFFERENT? The WashWater Wizard monitors the amount of film usage to determine the correct amount of wash water. Competitive wash water systems use a time-interval (hold and dump) concept of operation. Any fluctuations in processing volume require manual adjustment and can create potential film processing problems: Either the water will be dumped too often, or it will be reused far too long, allowing the accumulation of contaminants. This accumulation will ultimately affect film quality, archievability and the environment. The WashWater Wizard^TM is a closed loop system that operates in-line without requiring a holding tank. This means less floor space is occupied. Competitive systems depend on gravity to take the overflow from the processor to the wash water unit. They require an extra holding tank which adds to the cost and uses valuable floor space. Their operation interrupts production, is time consuming, and there is a potential risk of flooding the processor. The WashWater Wizard^TM system includes an automatically regulated biocide feeder. The Wizard continually monitors water usage and automatically doses the correct amount of biocide (even while in stand by mode) to substantially reduce biogrowth in the processor. Several other systems on the market today do not have automatic biocide dosing. Any system that does not address the issue of biogrowth is ignoring a major concern in processor maintenance! The result is expensive labor costs and down time.



					Optional Accessories: Floor Stand w/wheels Weight: 23lb/10kg Replacement Items: Activated Carbon Filters - Removes particulant contamination and discoloration of water. Package of 3. Weight: 1.6 lb/0.75 kg Resin Filters - Specially designed patented filters recover silver to < 1.0 ppm. Case of 6
			PURCHASE THE WASH WATER WIZARD WHEN: Regulations require hauling There is no drain for discharge You are on septic Biogrowth problems exist There are low regulatory discharge levels You want to reduce processor maintenance time You want to reduce water costs You don't have an in-line closed loop silver recovery system
	Dealer Contacts found on Home Page under Graphics, Photo, Medical, and NDT industry listings.
					This site designed and maintained by CSRS. Comments and suggestions are welcome! Content copyright © 1996, 1997, 1998, 1999, 2000, 2001. www.csrs.com All rights reserved, worldwide. Last revised 01/09/2001